EMA pocket thickness gauge.

The EM5000 EMA thickness gauge measures thickness of steel pipes, rolled sheets, rods, and other products made of steel, aluminum and other metals with an operating gap between the transducer and the metal up to 5 mm. The gap can consist of dirt, rust, salt deposits, paint, varnish, enamel, plastic or other non-conductive coating.

The EM5000 allows measurements without usage of couplant and without surface preparation.

The EM5000 can be used with the transducer with a pulsed electromagnet, which prevent dirt from sticking! These transducers work even on heavily soiled surfaces, leaving the transducer surface perfectly clean.

A special high-temperature transducer allows inspection of hot objects heated up to 750 °C.

Tilt angle makes a minor effect on the device’s readings, in contrast to conventional thickness gauges with piezoelectric transducers that require transducer fixed in a certain position.

The EM5000 thickness gauge has a color display protected by impact-resistant glass.

The device uses a special data processing algorithm that provides correct thickness measurements in the presence of disturbing factors such as metal anisotropy, usage of several reflectors, exposure to external interference. The algorithm allows reducing the human factor and simplifying the device interface.

The EM5000 is equipped with a replaceable battery: if necessary, the battery can be replaced with a new one, which extends the life of the device.

Connection to a tablet, smartphone or another Android device allows expanding the EM5000 features: analyzing A-scans, B-scans, working with gates, selecting a thickness measurement mode, signal processing parameters, etc. The EM5000 can be connected to a tablet via Bluetooth.